Little CMS intends to be a small-footprint color management engine, with
special focus on accuracy and performance. It uses the International Color
Consortium standard (ICC), which is the modern standard when regarding to
color management. The ICC specification is widely used and is referred to
in many International and other de-facto standards. It was approved as an
International Standard, ISO 15076-1, in 2005.
Since version 2.1, Little CMS fully implements ICC specification 4.2 plus
all addendums; it fully supports all kind of V2 and V4 profiles, including
abstract, devicelink, and named color profiles.
Color management refers to techniques that ensure consistent colors while
images are transferred from scanners or cameras to monitors and printers.
===> The following configuration options are available for lcms2-2.19.1:
DOCS=on: Build and/or install documentation
JPEGICC=on: Build color profile applier for JPEG
TIFFICC=on: Build color profile applier for TIFF
===> Use 'make config' to modify these settings
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
Change MASTER_SITES to GitHub
- Bump PORTREVISION for package change
littlecms.com is quite slow and sometimes unresolvable.
SF does not have 2.11 tarball when I downloaded it from littlecms.com.
And upstream changed 2.11 tag to include documentation change from pdf to odt
[1].
[1]
https://github.com/mm2/Little-CMS/commit/17eb080324a9f16e0e7ab37bbcda7ae42b946294
Let USES=localbase add -L${LOCALBASE}/lib to LIBS instead of LDFLAGS.
USES=localbase:ldflags can be used to set LDFLAGS. Normally LDFLAGS
appears too early on the command line causing some ports to link with
their own libraries in LOCALBASE (if installed) instead of WRKSRC.
Also make use of _USES_POST so -L${LOCALBASE}/lib is added as late as
possible after anything a port Makefile might set. Use _USES_POST
instead of .include in libedit.mk and libarchive.mk so things like
'USES=libedit localbase:ldflags' work correctly.
Fix some issues with LIBS in some ports.
Switch ports that don't support LIBS to localbase:ldflags.
PR: 212987
Exp-run by: antoine
Approved by: portmgr (antoine)
Revert r356926 and r356927. Not all ports that depend on lcms* have been
converted to USES=libtool yet, so their .la files may still refer to the
lcms* .la files.
When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la. So everything that subsequently links with libA will also
link to these extra libraries. This causes too much overlinking.
This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging. However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.
So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).
(Only the first 15 lines of the commit message are shown above )
Back out some parts of the previous commit. While "technicalist excellence"
might be something cool, eternal values such as obviousness and readability
should not be sacrificed in its sake.
Discussed with: pav
- Convert old school PLIST_SUB's to PLIST_FILES tuning and offload pkg-pist
- Assign MAN1 variable dynamically, based on selection of utilities
- Register `test' target quite natural dependency on `build' one, and hook
it to `regression-test' so tests will be run when building on tinderbox
- Canonicalize Makefile header
- Rephrase COMMENT line, define LICENSE (MIT)
- Prefer lowercase (foo) to uppercase (FOO) variables in ``.for .. .endfor''
loops, as it indicates better that variable supposed to be "local"
- Cleanup Makefile (drop no-op REINPLACE_CMD's, CFLAGS augmentation, etc.)
- Use more standard MANPREFIX instead of MAN1PREFIX which also does not seem
to be documented anywhere
- Improve port description (reformat and make it more complete)
- Stop telling lies about LGPL; while Little CMS did use LGPL until revision
1.12, it switched to the MIT license after that as it is more suitable for
commercial applications
- Remove Author tag since WWW page is comprehensive enough
- Return my ports back to the pool. I was unable to make any fixes to
my ports in the past 3 weeks while ports were broken on any 10.x
machines, which means I'm unable to maintain them. So let people know
that there's no available support for them until things are back to
normal (which also means that anyone with spare time will be able
to fix them without getting approval).
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
Remove USE_GNOME=gnometarget from ports. It has been a empty keyword since
mid 2008.
PR: ports/159624
Submitted by: Ruslan Mahmatkhanov <[email protected]>
- Add port for graphics/lcms2, a second version of Little CMS.
This is a separate port, because lcms2 is not API compatible with
lcms1.
WWW: http://www.littlecms.com/
