GNU make is a tool that controls the generation of executables and other
non-source files from source files. Its purpose is the same as that
of the utility make(1).
===> The following configuration options are available for gmake-4.4.1:
NLS=on: Native Language Support
===> Use 'make config' to modify these settings
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
Update devel/gmake to 4.3.
Some changes have been made in this release that break backwards
compatibility. Let USES=gmake force users to upgrade to this version so
port maintainers don't have to support older versions.
PR: 245725
Exp-run by: antoine
Approved by: portmgr (antoine)
Fix recursive dependency issue with gmake.
Add a hard .error so I don't miss this again.
PR: 237979
Submitted by: tcberner, adamw (based on)
Pointyhat to: bdrewery
Install texinfo files (GNU info) into ${PREFIX}/share/info
After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.
Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.
Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them
Bump revision of all impacted ports
PR: 232907
exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D17816
Remove a patch from devel/gmake so the port no longer depends on
print/texinfo which requires gmake. To break this circular dependency
gmake-lite was introduced. This can be removed now as well.
PR: 210623
Reviewed by: bapt
Exp-run by: antoine
Approved by: portmgr (antoine)
Add upstream patch 4762480ae9cb8df4878286411f178d32db14eff0:
Ensure forced double-colon rules work with -j.
This fixes parallel building of Firefox.
Reported by: cmt
- Update devel/gmake to 4.2.
- deskutils/tomboy, devel/ocaml-deriving-ocsigen: patch Makefile bug.
- games/0ad: disable make jobs when building bundled Spidermonkey.
PR: 209868
Exp-run by: antoine
Approved by: portmgr (antoine)
MASTER_SITES cleanup.
- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.
While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.
Also, replace some EXTRACT_SUFX occurences with USES=tar:*.
Checked by: make fetch-urlall-list
With hat: portmgr
Sponsored by: Absolight
Rename the gmake-lite binary into gmake-lite so that it doesn't conflicts with
gmake
Import patches from gmake (gmake-lite will be turned into a slave port later)
Add a minimal version of gmake to reduce the risk of circular dependencies on
the building cluster and allow to simplify the process on removing texinfo and
groff from base
Address a reasonably obscure issue with automatic restarting and
MAKEFLAGS. No PORTREVISION bump in this case since the confusion
and mass hysteria is simply not worth it.
PR: 185636
Submitted by: Julien Charbon <[email protected]>
Introduce ICONV_CONFIGURE_ARG variable defined at Uses/iconv.mk.
It's value is "--with-libiconv-prefix=/usr/local" for systems
before 100043 with ports libiconv and to use at systems post
100043 with base iconv it's value is "" (NULL).
Co-authors: bapt, madpilot and bsam (me)
Add a patch from upstream bugtracker to fix some jobs related build failures
exposed by webkit-gtk2 1.8.x.
PR: ports/170408
Exp-run by: beat@
Approved by: autotools@ (ade)
Obtained from: gmake bugtracker http://savannah.gnu.org/bugs/?30653
Reassign the autotools-related ports to a new mailing list,
[email protected]. This is for individuals willing to put in
the hard work to generate patches and work with portmgr as we put
them through -exp runs and work through port breakage that they
create. (A huge number of ports depend on these, so -exp runs are
required.)
Thanks to aDe@ for all the thankless work he's done over the years
to tame these beasts.
Hat: portmgr
Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.
To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.
To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.
Changes to Mk/*:
- Add runtime detection magic in bsd.port.mk
(Only the first 15 lines of the commit message are shown above )
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
Update to 3.81
Whilst this hasn't been through a full -exp run, it has been extensively
tested on my own tinderboxes with an appropriate variety of gmake-using
ports.
Clean up handling of locale directories at deinstall-time:
* Don't remove "system directories" (which were created by BSD.*.dist)
* Silently try to remove locale directories which we might have created
We already have a prototype for alloca() in stdlib.h, no need to
have it here too.
This lets us compile gmake with stricter compilers.
Submitted by: [email protected]
Various fixes for new scheme of detecting intl.4, which comes with this
version of GNU make.
Submitted by: KATO Tsuguru <[email protected]>
Also provide WITHOUT_NLS knob to build without localized messages.
Gmake now needs libiconv. I don't really care why, but a clean-room make
package fails otherwise. Anyone who wants to improve on this commit should
make sure to test that make package still works with libiconv not installed
*before* doing anything. See the following log for more info:
http://rabarber.fruitsalad.org/errors/200210090422/4-STABLE/gmake-3.80.log
Due to popular demant into each port which might be inserted into dependency
list by bsd.port.mk insert anti foot-shooting device, which prevents
infinite fork loop when the user defines corresponding USE_XXX in global
make.conf, command line or environment.
Similar devices should probably be inserted into ports that might be inserted
into dependency list by others bsd.foo.mk files (bsd.ruby.mk, bsd.python.mk
and so on.)
Stage a mini-coup, and borrow these ports from portmgr@ for a while,
since I'm doing most of the updating, and am working on a
port/Mk/bsd.<gnublah>.mk to move some cruft around.
Sponsored by: Mr. Smith and Mr. Wesson. :)
gettext upgrade uber-patch (stage 3)
- switch devel/gettext (0.11.1) on, installing full package
- flip devel/gettext-old (0.10.35) to installing only static binaries
with a "-old" suffix -- gettext-old will have its deorbit burn
sequence initiated just after 4.6-RELEASE
- fix up ports for the new world order
Reviewed by: portmgr
