GNU `recode' has the purpose of converting files between various
character sets and usages. When exact transliterations are not
possible, as it is often the case, the program may get rid of the
offending characters or fall back on approximations.
This program recognizes or produces around 150 different character
sets and is able to transliterate files between almost any pair.
Most RFC 1345 character sets are supported.
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
converters/recode: fix info file, add LICENCE, quiet portlint/portclippy
This has been broken for almost 10 months, and again 3 months of silence
from the maintainer, so let me step in to just fix it for the nonce.
- Add LICENSE=GPLv2+
- Add USES=makeinfo to fix .info file in clean-room builds (poudriere) [1]
- Reshuffle a few lines to please portclippy and portlint
- Bump PORTREVISION to flush out the broken packages and force rebuild
- Add DISABLED example to strip library in order to also please
stage-qa with DEVELOPER=yes (would require maintainer approval),
in post-install (just remove @: and the comment line to enable).
PR: 241879 [1]
Submitted by: Victor Sudakov <[email protected]> [1]
Approved by: portmgr@ (blanket, see MFH below)
MFH: 2020Q3 (blanket LICENSE, dependencies to unbreak, modernization)
Install texinfo files (GNU info) into ${PREFIX}/share/info
After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.
Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.
Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them
Bump revision of all impacted ports
PR: 232907
exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D17816
Remove libiconv.so.3 compatibility link that was added in r374303 to
prevent massive PORTREVISION bumps. Bump dependent ports that have not
been bumped since.
When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la. So everything that subsequently links with libA will also
link to these extra libraries. This causes too much overlinking.
This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging. However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.
So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).
(Only the first 15 lines of the commit message are shown above )
- Convert USE_AUTOTOOLS=libtool to USES=libtool.
- Replace PERL with REINPLACE_CMD in post-patch.
- Replace "iconv.h" with "${ICONV_PREFIX}/include/iconv.h" so
/usr/include/iconv.h is included on FreeBSD 10 even when
converters/iconv is installed. The port uses iconvctl(3) which
isn't declared in /usr/local/include/iconv.h with -DLIBICONV_PLUG.
- files/patch-lib-error.c: Implement program_name using __progname.
- files/patch-libiconv-Makefile.in: deleted because the libiconv
directory isn't built.
- files/patch-src-Makefile.in:
+ Remove chunks that aren't needed.
+ Remove ../lib/libreco.a from LIBS so CFLAGS+=-fPIC can be removed
from the port Makefile. Instead, just copy lib/error.c (the only
file needed from libreco.a) to src/error.c and compile it into
librecode.so.
PR: 186637
Approved by: demon (maintainer)
- Convert to new Uses/perl5.mk framework
- Resolve issues with implicit lang/perl in extract and patch dependencies
- Trim Makefile header
Reviewed by: bapt@ (exp-run)
Approved by: bapt@ (portmrg@)
Do not compile and use bundled libiconv, the converters/iconv from ports.
PR: 177321
Submitted by: William Grzybowski <[email protected]>
With help and suggestions from: bapt
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <[email protected]>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
Half of these ones missed yesterday while converting to USE_REINPLACE.
The other half needs perl to build.
Noticed on bento and others (full mailbox :-)
Use devel/gettext port;
Correct pkg-plist;
General cleanup;
Submitted by: naddy
Remove files/ru.po file since it is the same file included into recode
distribution.
gettext upgrade uber-patch (stage 3)
- switch devel/gettext (0.11.1) on, installing full package
- flip devel/gettext-old (0.10.35) to installing only static binaries
with a "-old" suffix -- gettext-old will have its deorbit burn
sequence initiated just after 4.6-RELEASE
- fix up ports for the new world order
Reviewed by: portmgr
Replace characters illegal in the specified encoding of the Greek
message catalog so it will work with new gettext.
Assistance from Costas Christoyannis <[email protected]>.
Approved by: demon
Fix MASSIVE typo INSTALL_SHLIBS --> INSTALLS_SHLIBS, which occured because I
just cun'n'pasted the name from Satoshi's commit message without checking it.
